Heat pump not heating, icing up or running nonstop? Here's what it usually means.
Heat pump repair finds why a heat pump isn't heating or cooling, whether that's a frozen outdoor coil, a failed defrost control, low refrigerant, a reversing valve fault or a thermostat setting, and fixes it. In Thornhill we repair air-source heat pumps and ductless heat pumps.
This page covers common symptoms, whether ice on the outdoor unit is normal, why a heat pump stops heating and when to call.
Ice buildup that the defrost cycle isn't clearing
Low refrigerant from a leak
A stuck reversing valve
A thermostat set to the wrong mode
A dirty filter or a failed fan
A failed compressor
A light frost that clears during a defrost cycle is normal. The unit switches to defrost for a few minutes and melts it. A solid block of ice is not normal, and it means a fault.
Fill out the form, or call and we'll book it with you.
Don't chip the ice. You can damage the coil.
A defrost fault. A failed sensor, relay or control board stops the unit from defrosting.
A reversing valve problem, which can stop defrost from starting.
Low refrigerant, so the unit can't make enough heat to melt the ice.
Poor airflow from a dirty filter or a failed fan motor.
Meltwater that refreezes. Water from snow or a leaking gutter can freeze on the coil. Fix the water source.
Make sure the thermostat is on Heat and the fan is on Auto. The unit may also just be in a defrost cycle, so give it a few minutes before you worry.
If it won't heat, ices over, trips the breaker or makes loud noises, turn it off and call.
Our Thornhill location is 7163 Yonge St, Unit 260, Markham, ON L3T 0C8. Call (437) 410-8394 and we'll book your visit.
Call (437) 410-8394We answer 24 hours a day, 7 days a week.